Tech due diligence process in M&A: The ultimate guide
The tech due diligence process step by step: what each stage covers, who’s involved, how long it takes, and how findings turn into deal terms in M&A.
Wilco van Duinkerken
CTO & Co-founder, X-Ray by Scaleflow

Let me ask you this: if technology is an asset, why is it checked last?
A technology review that reports in week five of a six-week M&A diligence window is too late. By then, a major finding can still stop a deal, but there's almost no room left to use it and negotiate a better one.
The tech due diligence process assesses a target’s product, architecture, code, engineering team, security, and intellectual property to test whether its technology can support the deal thesis. In M&A and venture capital, it typically moves through scoping, early assessment, technical review, reporting, negotiation, and a post-close remediation plan.
Typically, the process starts after the letter of intent (LOI) or term sheet. A better approach is to start it earlier: a short, code-based assessment before the buyer commits, followed by a targeted review of the risks that warrant further investigation.
That little switch in timing works because software is often the asset being acquired.
This guide explains how tech due diligence in M&A runs inside a deal, who performs it, how long each stage takes, and where its findings should reach the investment decision. It also explains how Scaleflow’s X-Ray and confirmatory due diligence fit into a two-pass process.
What technology due diligence is (and isn't)
Tech due diligence is an evaluation of the technology behind a business.
The scope usually includes source code, architecture, scalability, technical debt, security, engineering practices, intellectual property (IP), and the people responsible for the system.
Also, tech due diligence is distinct from IT due diligence and cybersecurity due diligence, which focus on different areas of risk:
| Review | What it examines | Main question |
|---|---|---|
| Tech due diligence | Product, source code, architecture, engineering team, scalability, security, IP | Can the technology support the deal thesis? |
| IT due diligence | Internal IT systems, infrastructure, business applications, operational dependencies | Can the organization’s internal technology support its operations? |
| Cybersecurity due diligence | Security controls, vulnerabilities, incident exposure, risk management | What security risks could affect the deal or the business after closing? |
These disciplines can overlap. A technology assessment may identify a security issue that requires a specialist review, or an IP concern that needs legal analysis. The important distinction is the subject being assessed.
Now, tech due diligence isn’t a general review of every part of the tech stack that the company uses. Its focus is the technology behind the product being acquired. As such, IT and cybersecurity reviews may run alongside it, depending on the target and the deal’s risk profile.
For the internal-systems side, our guide to IT due diligence includes a checklist.
Where tech due diligence in M&A sits in a deal
A typical M&A deal goes like this:
Now switch to a VC round, where the equivalent milestones are screening, term sheet, confirmatory diligence, investment agreement, and funding.
After an acquisition, integration often takes the form of a 100-day plan. For a growth investment, it may be a value-creation plan agreed with the management team.
Technical due diligence process normally enters the formal part after the LOI or term sheet.
The buyer has already spent time evaluating the business, and the parties have agreed on the broad commercial terms. The technical work then runs alongside financial, legal, commercial, and operational diligence.
In a six-week transaction window, tech due diligence may occupy weeks two through five. The timing varies by deal, but the pattern creates a familiar problem: the technical findings arrive after the price has largely been established.
That said, you may stumble upon recommendations to have M&A due diligence start as early as possible, then place the process around the LOI. The two notions are compatible if “as early as possible” means before the LOI.
Otherwise, it doesn’t eliminate confirmatory diligence. It merely changes what the team knows before committing to it, and it’s part of the reason why European VCs are pricing deals blind.
Hence, a risk found before the LOI can influence whether to proceed and at what price. The same risk found weeks later may leave the buyer choosing between renegotiation or added protections on one side and walking away on the other.
Tech due diligence process, step by step
There are six tech due diligence steps (or stages, if you prefer).
First, the process establishes what the deal needs to know. The next two stages assess the technology (first quickly, then in greater detail where necessary), while the remaining stages turn the findings into an investment decision and contractual protections.
Step 1. Scoping: tie the questions to the thesis
Tech due diligence should start with the reason the investor wants to own the business.
A growth investor backing a SaaS company may need to know whether the architecture can support a much larger customer base. A VC investor may want to understand whether a small engineering team can deliver the product roadmap without relying on one person.
The questions differ because the investment theses are different.
Scoping turns the thesis into a focused set of technical questions. A good starting point is around five questions that could change the deal decision. For example:
- Can the product support the customer and revenue growth assumed in the model?
- Is the codebase maintainable enough for the planned development pace?
- Does the company depend on one engineer who holds essential system knowledge?
- Are there security, licensing, IP, or other issues that could restrict commercial use?
- What technical work would be required to deliver the investment thesis?
Each question should be specific to guide the review and avoid broad instructions.
Scoping also sets the level of evidence required. A small early-stage investment may need a different level of assurance from a large acquisition with a complex integration plan.
The output is a scope the deal team can use to judge the findings. Without it, a technical report risks becoming a catalogue of engineering issues, with no clear link to the investment decision.
Step 2. Early read, before the LOI or term sheet
Early read is the first pass, since it gives the investor a view of the technology before the commercial terms are largely settled.
So, the aforementioned code-based assessment begins with read-only access to the target’s repositories. The codebase is scanned as a whole to avoid relying on a sample selected for review, since only a repository-level scan can reveal patterns across modules (e.g., ownership gaps or parts of the system that may depend on a small number of engineers).
Then, automated checks surface technical patterns and potential risks, which an operator then verifies.
Arguably, the biggest reason why those findings are highly useful is a frequent assumption in the investment thesis: the technology can (and will) be developed and maintained by the organization that will own it.
If the system relies on undocumented knowledge held by one person, the buyer needs to understand that before the deal proceeds.
The early read should produce a clear verdict:
- Go: Initial findings support continuing with the deal.
- No-go: Risks appear incompatible with the investment thesis or acceptable risk level.
- Further review: Deal may still make sense, but specific issues call for additional investigation.
It should also distinguish findings already supported by evidence from questions that remain open, which makes the next step easier to scope.
The best part is, you get all of the above in a single platform.
For instance, Scaleflow’s X-Ray uses more than 250 automated checks and operator verification. The process is designed to take around one business day, with roughly 30 minutes of the target’s CTO time.
The result is an early decision aid, where an investor can opt whether to proceed, negotiate, or spend more time investigating the technology.
Step 3. Deep dive: investigate where the early read points
A full technical review is warranted when the early read identifies risks that could affect the deal, or when the investment thesis requires a more detailed evaluation.
The review combines interviews across the organization with technical evidence. Thus, the reviewer may speak with the CTO, engineering leads, product managers, and other people responsible for building and operating the product.
By nature, the questions should follow the evidence gathered in the first pass.
For example, if the scan suggests that a core module has high churn and unclear ownership, the team can investigate why it changes so frequently and what would happen if a person who understands it left.
Architecture discussions can then be cross-referenced against the code. The review may examine how the system handles growth, how technical debt affects delivery, whether security practices match the product’s exposure, and whether the engineering organization can execute the roadmap.
Each finding needs to be put in a commercial context, with an estimated financial impact where evidence allows it. A technical issue may require a redesign, additional engineers, a security remediation project, or a change to the product roadmap.
The output is a risk mitigation matrix. It connects each material finding to its likely effect on the business, its severity, and the action required.
This is where confirmatory due diligence adds depth to the early read. As it’s operator-led, it uses interviews to investigate the evidence and can assign a financial impact to individual findings.
The aim is to give the deal team enough information to make a decision and negotiate the terms. A list of technical concerns without a view of their commercial consequences leaves too much work for the investment committee.
Step 4. Reporting and the investment committee
Concerning how to read the findings, the report should make the technology understandable to people who aren’t engineers.
An investment committee needs an explanation of what the findings mean for the deal. It should be able to see which risks could affect the investment thesis, which require spending after close, and which are manageable within the existing plan.
A great report addresses:
- Technology risk: Which findings could affect the product, growth, or delivery?
- Technical debt: What work is likely to be required, and at what cost?
- Crown jewels: Which technical capabilities create an advantage for the business?
- Key-person risk: Where does essential knowledge or ownership sit among a small number of people?
- Remediation: What should be addressed, by whom, and on what timeline?
In a close-to-perfect world, the report should distinguish a serious issue from a routine engineering improvement.
It’s because a system can have technical debt and still be a sound investment. So, the question is whether the debt affects the thesis in any meaningful way or creates a risk the buyer can’t accept.
Remember: a technical report is useful only if the people making the deal decision can act on it. See an example technical diligence report to get a clearer idea of what you should be working with.
For what the report itself should contain, see what a technical due diligence report actually covers.
Step 5. Turning findings into deal terms
At this point, technical findings become part of the deal.
A major risk can affect the purchase price, investment amount, conditions for closing, or protections negotiated into the agreement. The right response depends on the issue and the parties’ ability to address it.
| Finding | Possible deal response |
|---|---|
| Significant remediation cost | Adjust the price or earmark a remediation budget |
| Material issue that must be resolved before closing | Add a condition precedent |
| Uncertainty around a specific liability | Consider an escrow or indemnity |
| IP ownership or open-source licensing concern | Refer to legal DD; address warranties, assignments, or other protections |
| Delivery risk tied to future milestones | Consider an earn-out or milestone-based structure |
| Risk incompatible with the investment thesis | Renegotiate or walk away |
Bear in mind that the technical reviewer shouldn’t negotiate legal language. The role is to explain the evidence and its implications so the deal team and legal advisors can determine the appropriate response.
Some findings belong in the financial model. If the company needs additional engineers or a substantial architecture change, the cost should be reflected in the assumptions about future spending and delivery.
Consequently, other findings belong in legal diligence. Let’s say you have an unsigned IP assignment - it requires legal review to establish ownership and determine what contractual protection is needed.
The technical report should identify the issue. Then, the financial team should examine its impact, and legal advisors should determine how it’s addressed in the SPA or investment agreement.
Step 6. After close: the remediation roadmap
The remediation roadmap turns the findings into work the engineering can schedule and own. It should identify the highest-priority fixes, assign responsibility, estimate the resources required, and set milestones.
In case of an acquisition, the roadmap can feed into the 100-day plan and post-merger integration work. For a VC investment, it may become part of the operating plan agreed with the founder and CTO.
The roadmap also provides a way to check whether the investment thesis remains achievable. If the technology needs more work than expected, there’s room to revisit the delivery plan and budget before the issue becomes a surprise.
At the end of the six-stage process, the final output of tech diligence as a whole is more than a report. It’s a set of decisions that carries from screening through negotiation and into the work of owning the business.
Who’s involved and what each party needs
Regarding who performs tech due diligence, let’s just say it’s a shared deal workstream. The technical reviewer gathers and interprets evidence, but the findings need to reach the people responsible for investment decisions and financial matters.
| Party | What they provide | What they need back |
|---|---|---|
| Deal team/IC | Investment thesis, deal context, decision criteria | Verdict, risk rating, implications for the deal |
| Tech due diligence provider | Technical assessment, code analysis, interviews | Access to evidence and clear scope |
| Target founders and CTO | Read-only repository access, technical context, management time | Clear requests, fair assessment, findings they can respond to |
| Legal advisors | Contractual context and legal review | IP, licensing, security, or other findings requiring legal action |
| Financial advisors | Financial model and deal assumptions | Remediation costs and implications for valuation or future spending |
A practical approach to tech due diligence should be designed to surface business risk first and architectural detail second.
So, for the early read, the target’s burden can be relatively light: read-only access to the repositories and approximately 30 minutes of CTO time. A confirmatory review usually requires more documentation and interviews, depending on the issues being investigated.
How long tech due diligence takes
How long does tech due diligence take depends on the scope and the target’s complexity. A traditional (single pass) technical review may take three to six weeks. In a six-week overall deal window, that can place the findings close to signing.
A two-pass process separates the early decision from the detailed investigation. The early read takes around one business day, then confirmatory diligence takes one to two weeks when the findings justify it.
In a nutshell, the difference is between the time needed to get an initial view and to investigate material risks.
Nonetheless, the two-pass approach doesn’t promise that every deal will finish faster. If a target is complex, it may still require a substantial technical review. The benefit is that the investor can make an earlier decision about whether that work is worth doing.
What the process assesses
The technical due diligence checklist investors actually use reflects the investment thesis, but most software assessments cover the following six areas:
| Area | What the reviewer examines | Why it matters to the deal |
|---|---|---|
| Product and architecture | Product structure, dependencies, architecture, system design | Tests whether the technology can support the business plan |
| Code quality and technical debt | Maintainability, complexity, churn, patterns across the codebase | Helps estimate future engineering effort and cost |
| Engineering team | Skills, ownership, delivery practices, key-person dependencies | Tests whether the organization can execute the roadmap |
| Security | Vulnerabilities, security practices, and exposure | Identifies risks that could affect operations or customers |
| Scalability and reliability | Capacity, performance, resilience, growth constraints | Tests whether the system can support expected demand |
| IP and licensing | Ownership, assignments, third-party code, open-source licensing | Helps establish whether the company can legally use and commercialize its technology |
Be mindful of possible overlaps. Say, a module with high churn may be a code-quality concern and a source of dependency on a key person.
Hardware/software hybrids may call for extra attention to embedded software, firmware, hardware dependencies, and the relationship between the physical product and its software. The scope should reflect what the company sells.
Common mistakes in the tech due diligence process
Several process choices make technical diligence less useful than it could be.
- Starting after the price is set: A review that kicks off after the LOI can still identify a deal-breaking issue, but leaves less room to adjust the valuation or commercial terms. An early read gives the investor a technical view before commitment.
- Relying on documents and interviews alone: Architecture diagrams and CTO interviews provide context, but they are mere descriptions of the system. Code-based evidence provides the reviewer with another way to test those descriptions.
- Reviewing a sample instead of the whole codebase: Limited sampling can miss patterns elsewhere in the system. Whole-codebase scanning helps surface issues that are distributed across modules, including churn and ownership gaps.
- Using a scope disconnected from the investment thesis: A report may contain technically correct findings that don’t answer the investor’s questions. Scoping should begin with the business plan and the assumptions the technology must support.
- Leaving the report outside the deal process: Findings should reach the IC and legal advisors. Otherwise, risks may be documented without affecting price and protections, or the plan after close.
- Skipping remediation planning: A buyer may understand the risks and still fail to assign resources to address them. The roadmap should identify owners, priorities, expected costs, and other relevant details before the work becomes part of the operating plan.
- Skipping technical due diligence process on smaller deals: Scope can be proportionate to the investment, but the underlying questions remain. A small software company can still have IP or security risks that affect the investment thesis.
The common thread is a failure to connect the technical evidence to a decision.
How the process changes by deal type and stage
The process follows the same broad sequence across deals, but the questions and depth vary.
| Deal type | Main question | Typical depth and timing | Key risks |
|---|---|---|---|
| Early-stage VC round | Can this team build the product and deliver the thesis? | Early read during screening; targeted review based on risk | Team capability, early technical debt, key-person dependency |
| Growth round | Can the technology and engineering organization support the next stage of growth? | Early read before the term sheet; confirmatory review where needed | Scalability, architecture constraints, key-person risk |
| Acquisition or buyout | Can the buyer own, operate, and develop the technology as planned? | Early assessment before LOI; confirmatory diligence before signing | Integration risk, organizational maturity, IP, security, remediation cost |
In the eyes of an early-stage VC, the engineering team may be small and the architecture still evolving. Hence, tech due diligence for VC needs to distinguish manageable early decisions from risks that could prevent the company from delivering its plan.
Growth investors are more likely to focus on whether the technology can support a larger customer base and whether the organization can deliver a more demanding roadmap.
In an acquisition or buyout, the buyer may need to understand integration costs and organizational maturity, along with the effort required to combine systems or change the product. Those questions should be part of the scope from the beginning.
Targets built largely with AI tools raise their own questions on ownership, control and cost; see due diligence for vibe coded startups.
How Scaleflow runs the process
Always keep in mind that a functional process gives the deal team a clear answer at each stage and makes the next action explicit. That’s why Scaleflow uses a two-pass approach to product and tech due diligence.
First, X-Ray represents the early read. It uses read-only repository access, automated checks across the codebase, and operator verification to produce both an IC-ready verdict and a technical report in around one business day.
From there, the follow-up review is in the form of confirmatory due diligence, where the early findings or deal thesis require more investigation. It combines operator-led interviews, technical evidence, financial impact per finding, and a risk-mitigation matrix, wrapping up everything in one to two weeks.
Scaleflow reports experience across 11+ verticals, including hardware/software hybrids, and works with more than 40 European funds. As a proverbial cherry on top, the company also reports a 100% partner repeat rate.
So, if you want to get a technical view early enough to use it, run an X-Ray on a live deal and see for yourself that additional diligence time is more than worth it.
FAQs
How long does tech due diligence take in M&A?
Traditional tech due diligence may take three to six weeks, depending on the target and scope. A two-pass process starts with an early read that takes around one business day. If the findings warrant further investigation, confirmatory diligence typically takes one to two weeks. The overall timeline depends on the deal and the complexity of the technology.
When should tech due diligence start?
Tech due diligence should start during screening, before the LOI or term sheet. An early assessment gives the investor a technical view before the commercial terms are largely settled. Confirmatory diligence can then investigate material risks before signing or investment approval.
What’s the difference between tech due diligence and IT due diligence?
Tech due diligence examines the product and engineering organization: source code, architecture, scalability, technical debt, security, and IP. IT due diligence examines the internal technology used to run the business, such as business applications and internal systems. For a software company, the former evaluates the asset being acquired, and the latter assesses the systems supporting the organization.
Who performs tech due diligence?
Tech due diligence may be performed by internal CTO-level staff who understand the investor’s context, specialist technical diligence providers that focus on technical evidence and deal questions, or large advisory firms that may offer broader diligence capabilities. Internal reviewers understand the investor’s context but may have limited time or independence. The right choice depends on the deal’s scope, complexity, and required expertise.
What documents and access does the target need to provide?
An early read can use read-only repository access and a short CTO session. A confirmatory review may require architecture documentation, technical materials, and interviews with engineering and product leaders. The exact requests depend on the investment thesis and the issues identified in the first pass.
What happens if tech due diligence finds a major issue?
The investor can use the finding to renegotiate the price, add contractual protections, set a condition for closing, or decide not to proceed. The appropriate response depends on the issue. A major risk should be connected to a specific decision rather than left as a note in the technical report.
Services
Keep reading
Related articles

IT Due Diligence: Best Practices and a Checklist for Good Measure
An IT due diligence checklist that asks for evidence, not yes/no answers, plus best practices and what IT DD misses when the target sells software.

Due diligence for vibe coded startups: What to check before you invest
Due diligence for vibe coded startups: seven checks on defensibility, ownership, control, security, scale, delivery and cost, with the red flags and what each means for the deal.

What Does a Technical Due Diligence Report Actually Cover?
What a technical due diligence report covers: the investor summary, the full technical report, six areas of evidence, and how to tell a useful report from a box-ticking one.
Start with an X-Ray.
1 business day. The complete picture. 300+ assessments delivered.